Features
DirecTV SWM SL3S 3 Sat LNB
Now you can simply replace your old SL5 (four output) LNB head with this new SL3S (one output)
LNB head and have the newest DirecTV technology everyone has been asking and waiting for!
Up to as many as 8 DirecTV HD receivers or up to as many as 4 HD DVR receivers all on one wire!!
No more being forced to run two lengths of RG6 coax into your den for your brand new HD DVR. Now you can use both tuners on your DVR with only one cable run
from the dish to the receiver. SWiM power supply and 4-way SWiM splitter included!
Works with the following receivers only HR24, HR23, HR22, HR21, HR20, H24, H23, H22, H21, H20, R22, R16, D12
Features
- Supports THREE Satellites @ 99 /101 / 103
- Uses only 1 RG6 between the SL3S and the Splitter
- Uses only 1 RG6 between the Splitter and your HD DVR
- Maximum Distance from SL3S to Receiver is 150'
- Compatible only with the HR24, HR23, HR22, HR21, HR20, H24, H23, H22, H21, H20, R22, R16, D12 DirecTV Receivers
- Non-Compatible with older non-SWM capable DirecTV Receivers
- Power Supply Included
- SWM 4-way Splitter is Included
- Manufactured by both WNC and Eagle Aspen
- Other possible markings may be SL3SPIG-WNC or SL3SPIG-P
- DO NOT USE B-BAND CONVERTERS WITH SWiM TECHNOLOGY
DirecTV SWM SL3S 3 Sat LNB Technical Specs
- Satellite Input Frequency Range: 2 - 2150Mhz
- Input Signal Power Level: dBm -45 to -15 dBm per transponder
- Output Frequency Range: MHz 950 - 2150 (Satellite)
- SWM Channel frequencies: MHz 950 - 1800 (Channels 1-9)
- Output Signal Power Level dBm -31 dBm (min) per SWM channel
- DC Power: Power Supply (21Vdc, 2.1A)
- Operating temperature range: C -34 to +52
|
